MaxxEcu Race

    $1,573.80
    • Extremely versatile engine control system for powerful engines with up to 8 sequential cylinders. Up to 12 in wasted spark
    • Faster and easier tuning with built-in wideband lambda and a built-in MAP-sensor up to 3 bar / 43.5 psi of boost
    • Get into serious tuning with advanced functions such as built-in E-throttle, 8 EGT, knock sensor inputs and superfast Cortex M3 CPU
    Product
    Quantity

    Full Kit Includes;

    -ECU Module

    -Wiring harness, EGT Harness

    -Wideband sensor and connectors

    -Bluetooth Antenna

    -USB Memory

    -Several cables for programming

    -MAP sensor tube

    -Manuals and Merchandising, stickers, etc

    JUST ecu includes;

    -ECU Module

    -Manuals and Merchandising, stickers, etc

    Target engines of MaxxECU RACE
    • All 3-12 cylinder engines (4-stroke)
    • Up to 8 cylinders fully sequentially
    • Up to 12 cylinders in wasted spark
    MaxxECU RACE inputs
    • Intake air temperature sensor (IAT)
    • Coolant temperature sensor (CLT)
    • Throttle position sensor (TPS)
    • Lambda (WBO) sensor. Uses a sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2 and 4.9
    • 2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference
    • 2 extra temperature sensors. Can be used as switches or control of additional functions
    • 2 knock sensor inputs
    • 6 extra 0-5V inputs. Can be used for additional sensors such as measurement oil/fuel pressure
    • 4 extra digital inputs used for example speed sensors (VR / Hall) or switches
    • 8 EGT TYPE-K/N inputs (1200C/2200F) in separate harness
    MaxxECU RACE outputs
    • 8 peak/hold injector outputs. 1-2 high or low impedance injectors per output. 8A per output
    • 8 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
    • 9 extra LOW DRIVING outputs for additional features. Can be adjusted to control virtually anything like fuel pumps, idle valves. GPO 1-8,10 (2A), GPO 9 (5A)
    • 2 extra +12V DRIVING outputs (GPO 15,16) (2A)
    • 4 extra motor outputs (ex E-Throttle). GPO 11-14 (2A)
    MaxxECU RACE technical
    • CAN bus for expansion modules, OEM vehicle CAN, ODBII
    • USB communication for tuning with MTune
    • Bluetooth for connecting to mobile devices with MDash
    • 8MB memory for internal logging, up to 1000Hz.
    • Supply voltage 8-22V
    • ARM Cortex-M3 120MHz main processor. Three extra processors to handle the trigger, injectors and knock detection
    • Resolution on ignition: 0.1 degrees
    • Resolution on injectors: 0.001 ms
    • Updates the fuel and ignition calculations 2000 times per second
    • The fastest PC communication on the market
    • 50Hz sampling rate on all EGT inputs
    • 1000Hz sampling rate on all analog inputs
    • Weight: 880g
    • 155x195x40mm (including mounting points, excluding connector)

    Specific References

    EAN13
    7427248066439