Mazda Mx5 Standalone PnP Standalone ecu *all models*

$328.21

Plug and play ecu for all mazda mx5 models

Model/Type
Quantity

Please contact by email for more detailed info, photos are just an example of a few models already built by us, this is a full custom made by order.

Full Plug and play any 1.6, 1.8, 1.8 VVT

What you will get is flexible and configurable fuel and ignition management that will work for the majority of every day type setups. Currently supported features include:

  • 16x16 3D fuel and ignition maps, with base of either TPS (Alpha-N) or MAP (Speed Density)
  • Supports up to 8 cylinders fuel and ignition with 4 channels of fuel and 4 channels of ignition outputs
    • 1, 2 (Even fire only), 3 and 4 cylinder engines with full sequential fuel and ignition
    • 6 (even fire only) and 8 cylinder engines are supported with wasted spark and 2 squirts per cycle
  • 6x6 3D individual cylinder trim on engines up to 4 cylinders
  • After Start Enrichment
  • Rev limiting (Spark based, hard and soft)
  • Cranking specific enrichment, dwell timing and advance
  • General logging through TunerStudio
  • High speed tooth logging
  • TPS calibration through TunerStudio
  • Sensor calibration through TunerStudio (Coolant, IAT and O2)
  • Warm Up Enrichment (WUE)
  • TPS based acceleration enrichment
  • Tacho output
  • Fuel pump activation/deactivation (With priming)
  • Over dwell and over duty protection
  • Battery voltage compensation for dwell and injectors
  • Modular wheel decoder support. Included decoders:
    • Missing tooth (Eg 36-1, 60-2 etc)
    • Dual wheel (Evenly spaced teeth on crank, single tooth on cam)
    • Basic distributor
    • GM 7X
    • GM 24X
    • 4g63 aka 4/2
    • 'Jeep 2000'
    • Audi 135
    • Miata 99-05
    • Honda D17 (12+1)
    • Nissan 360
    • Subaru 6/7
    • Taking requests...
  • Open and closed loop idle control (PWM and Stepper)
  • Closed loop boost control
  • Open loop VVT control
  • Deceleration fuel cut off (DFCO)
  • Launch control
  • Flex fuel
  • O2 based autotune (Registered version of TunerStudio required)