MaxxEcu Street

    • Advanced entry-level engine control system for up to 6 sequential cylinders. Up to 12 in wasted spark
    • Faster and easier tuning with built-in wideband lambda and a built-in MAP-sensor up to 3 bar / 43.5 psi of boost.

    Target engines for MaxxECU STREET
    • All 3-12 cylinder engines (4-stroke)
    • Up to 6 cylinders fully sequentially
    • Up to 12 cylinders in wasted spark
    MaxxECU STREET inputs
    • Intake air temperature sensor (IAT)
    • Coolant temperature sensor (CLT)
    • Throttle position sensor (TPS)
    • Lambda (WBO) sensor. Uses a sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2, 4.9
    • 2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference
    • 2 extra temperature sensors. Can be used as switches or to control additional functions
    • 2 extra 0-5V inputs. Can be used for additional sensors such as for measurement of fuel/oil pressure
    • 2 digital inputs used for example for speed sensors (Hall) or switches
    • Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost
    MaxxECU STREET outputs
    • 6 injectors outputs. High impedance only
    • 6 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
    • 4 outputs for extra features. Can be used to control virtually anything. Fuel pumps, idle control, boost solenoids, nitrous, shift lights, fans, warning lights, etc. GPO 1-3 (2A), GPO 8 (5A)
    MaxxECU STREET technical
    • CAN bus (additional wires required)
    • USB communication for tuning with MTune
    • 8MB memory for internal logging, up to 1000Hz
    • Supply voltage 8-22V
    • ARM Cortex-M3 120MHz main processor
    • Resolution on ignition: 0.1 degrees
    • Resolution on injectors: 0.001 ms
    • Updates the fuel and ignition calculations 2000 times per second
    • The fastest PC communication on the market
    • Weight: 520g
    • 140x134x42mm (including mounting points, excluding connector)
    • Aluminium casing

    Specific References