Mazda MX5 PnP Miata ECU Eunos Mk2.5 01-05 1.6 & 1.8


    Mazda Miata 01-05 NB2 MK2.5 Plug and Play Standalone ecu


    Mazda Miata 01-05 NB2 MK2.5 Plug and Play Standalone ecu

    -400kpa map sensor

    -usb connection

    -Alternator control

    -Basemap included

    -Extra connector for;

    launch control

    extra ignition outputs for individual coilpacks

    boost control output

    What you will get is flexible and configurable fuel and ignition management that will work for the majority of every day type setups. Currently supported features include:

    • 16x16 3D fuel and ignition maps, with base of either TPS (Alpha-N) or MAP (Speed Density)
    • Supports up to 8 cylinders fuel and ignition with 4 channels of fuel and 4 channels of ignition outputs
      • 1, 2 (Even fire only), 3 and 4 cylinder engines with full sequential fuel and ignition
      • 6 (even fire only) and 8 cylinder engines are supported with wasted spark and 2 squirts per cycle
    • 6x6 3D individual cylinder trim on engines up to 4 cylinders
    • After Start Enrichment
    • Rev limiting (Spark based, hard and soft)
    • Cranking specific enrichment, dwell timing and advance
    • General logging through TunerStudio
    • High speed tooth logging
    • TPS calibration through TunerStudio
    • Sensor calibration through TunerStudio (Coolant, IAT and O2)
    • Warm Up Enrichment (WUE)
    • TPS based acceleration enrichment
    • Tacho output
    • Fuel pump activation/deactivation (With priming)
    • Over dwell and over duty protection
    • Battery voltage compensation for dwell and injectors
    • Modular wheel decoder support. Included decoders:
      • Missing tooth (Eg 36-1, 60-2 etc)
      • Dual wheel (Evenly spaced teeth on crank, single tooth on cam)
      • Basic distributor
      • GM 7X
      • GM 24X
      • 4g63 aka 4/2
      • 'Jeep 2000'
      • Audi 135
      • Miata 99-05
      • Honda D17 (12+1)
      • Nissan 360
      • Subaru 6/7
      • Taking requests...
    • Open and closed loop idle control (PWM and Stepper)
    • Closed loop boost control
    • Open loop VVT control
    • Deceleration fuel cut off (DFCO)
    • Launch control
    • Flex fuel
    • O2 based autotune (Registered version of TunerStudio required)
     this is a custom made product we will not accept any returns, it's up to you to decide and understand if this is the best solution for you. All the support and documentation will be provided.

    You might also like