Volkswagen Audi Skoda Seat 1.8T AEB/AGU/AJL/ANB Plug and Play standalone ecu
Plug and Play standalone ecu for the Vw/Audi AEB and AGU (cable throttle) engines, the ecu will plug straight into the original harness and doesn't require any further wiring to get the engine running.
There is a 6 pin connector on the back of the ecu for extra inputs/outputs.
This ecu will control the IDLE by ignition advance (similar to what recent cars do), doesn't use the original idle motor like the original ecu.
Supplied with a basemap.
For VAG 1.8T engines with cable throttle and Motronic M3.8.2/4/5 not for ME7.5 or electronic throttle engines!
Most common engine codes: AGU, AEB, AJL,ANB
- 400kpa map sensor
- Boost control
- 16x16 ignition/fuel tables
- Several correction tables(Dwell, IAT, cold advance etc etc)
- Launch control (uses original clutch sensor)
- Flat gear shift (uses original clutch sensor)
- Full Sequential possible (only for 1 window CAM sensor)
- Acceleration Enrichment by TPS or MAP
- Nitrous Control
- Thermo Fan control
- Staged Injection
- Sequential Fuel Trim
- 0-5v input for wideband controllers
Uses tunerstudio for tuning (it is not megasquirt based)!
Any further questions just send us a message